SINGLE MOULD PRESS

SINGLE MOULD PRESS

SINGLE MOULD PRESS

wet press

 

 

 

 

SINGLE MOULD PRESS Wet Mix Kerbstone Press– Our machines are easy to operate and as a result also have easy maintenance plans, which lead to better efficiency and less chance for breakdowns.
– Unique Factories revolutionized the wet mix press industry with precision engineered part And service.
– Our skilled technicians are available around the clock, and can service any breakdown with direct full service assistance.
– Unique Factories is fully compliant with international Standards (B.S.) and standards of Dubai, Abu Dhabi, Kingdom of Saudi Arabia, Qatar, Bahrain, Oman and Kuwait.- We do have custom tooling available (upon request).
– PLC control system.
– Our production capacity is medium to large with a minimum of 60 stones per hour.
– The Machine power supply use 380 to 400 volts.
– Powered Take Off
– Powered Palette Magazine
– Custom Tooling Available (upon request)

SINGLE MOULD PRESS

WET PRESS

Spare Parts

Unique Factories prides it self on maintaining and inventory of all the necessary spare parts that might be needed during the production cycle. Every single, nut, bolt, seal, spring and screw is available and in stock. Our logistics department makes sure we are stocked up so when you need to get your business back up and running, we have just the item you need. Not only do we carry these items in our factory but we will also ship them directly to your specified location

SINGLE MOULD PRESS

WET PRESS


WET CONCRETE PRESSES

WET CONCRETE PRESSES Fielding and Platt wet concrete presses comprises two basic press types, the single mould and the triple mould capable of exerting a maximum force of 400 tonnes (4 MN).

WET CONCRETE PRESS

TRIPLE STATION

WET CONCRETE PRESS

TRIPLE STATION

The wet press process has since become recognised as the process by which the highest quality concrete paving slabs and kerbs are made. It is the specified process in the UK and the Middle East and is also preferred in other countries. The wet pressing process involves compressing a wet concrete slurry under a hydraulic press in on order to remove the excess water. Filters either side of the concrete ensure only water is extracted resulting in a fully compacted material with a near optimum water/cement ratio. A vacuum system removes the extracted water resulting in a product which can be ejected from the mould and stacked for final curing. Production rates can be up to 12 products per minute.

THREE MOULD PRESS

The flagship of concrete pressing is the 3-Mould Rotary Press. By using a hydraulic pressing process and rotary table system, this machine is one of the most efficient ways of producing pressed concrete products.

Forest Press supply everything you need for the 3-Mould press. From a simple seal or filter, to a gearbox, mould table, or even to complete press, we pride ourselves in our supply ability!

WET CONCRETE PRESS

TRIPLE STATION


Home » wet hydraulic press